ShoppingCommon Problem AreasCatalogueResource CentreDelivery Options
Basket / Checkout0items0.00Show Items
PestFix
Find a Product
Search Product Index
Call Our Sales Team
01903 538 488
Mon - Fri 8am - 6pm
Home SolarFix 30m Solar Panel Bird Exclusion Kit

Related Products

SolarFix - Solar Panel Mesh - 25mm X 25mm X 250mm X 30m 19G 304 Stainless Steel

From 119.74

SolarFix - Solar Panel Mesh - 25mm X 25mm X 200mm 16 Gauge Weldmesh Galvanised

From 54.30

SolarFix - Solar Panel Mesh Clips

From 3.59

PestFix Standard Side Action Wire Cutter

From 16.79

Netting Corner Tie 160mm x 100

From 3.97

Professional Felco C7 Side-Action Wire Cutters

From 74.37

Guano Removal Tool Kit

From 32.05

PPE Kit Professional - One Person Kit

From 38.48

PPE Kit Standard - One Person Kit

From 11.18

SolarFix 30m Solar Panel Bird Exclusion Kit

SolarFix 30m Solar Panel Bird Exclusion Kit
SolarFix 30m Solar Panel Bird Exclusion Kit
SolarFix 30m Solar Panel Bird Exclusion Kit
SolarFix 30m Solar Panel Bird Exclusion Kit
SolarFix 30m Solar Panel Bird Exclusion Kit
SolarFix 30m Solar Panel Bird Exclusion Kit
SolarFix 30m Solar Panel Bird Exclusion Kit
SolarFix 30m Solar Panel Bird Exclusion Kit

Click on an image to enlarge

  • SolarFix keeps pigeons and other pest birds out from under solar panels on pitched roofs
  • Everything you need to treat 30m of solar panels save 15% on component prices
  • SolarFix kit includes wire mesh, specialist SolarFix retaining clips and cutting tool
  • 100% effective when properly installed, better than using spikes, chicken mesh or repellent gels
  • Does not pierce roof or solar panel, no leaks no warranty issues with panels
  • Fast and easy to install, no gluing or drilling necessary.
WM134 - SolarFix 30m Solar Panel Bird Exclusion Kit - Galvanised Steel239.99Each199.99
ex.vat
WM140 - SolarFix 30m Solar Panel Bird Exclusion Kit - Stainless Steel311.99Each259.99
ex.vat

Specification

For this kit to work the solar panel must have a minimum 20mm return lip on the underside of the frame.

SolarFix Kit Contents:

  • 1 x Solar Panel Weldmesh Roll in Galvanised or Stainless Steel
  • 60 x SolarFix Panel Mesh Clips
  • 1 x Standard Wire Cutters
  • 20 x Corner Zip Ties

SolarFix Galvanised Steel Weldmesh Spec:

  • Manufactured from: 16 gauge / 1.60 mm diameter European Grade A Hot Dipped Galvanised wire.
  • Mesh Size: 25mm X 25mm (1" X 1")
  • Roll Width: 200mm (0.66')
  • Roll Length: 30m (100')

SolarFix Stainless Steel Weldmesh Spec:

  • Manufactured from: 19 gauge / 1.00 mm diameter European Grade A 304 stainless steel wire.
  • Mesh Size: 25mm X 25mm (1" X 1")
  • Roll Width: 250mm (1')
  • Roll Length: 30m (100')

SolarFix Solar Panel Clips Specs:

  • Where to Use: Rooftop solar panel arrays
  • Target Bird: All species
  • Bird Pressure: All levels
  • Material: U.V.-stabilized polycarbonate
  • Installation: Wire mesh is bound to solar panels using patent-pending clips
  • Expertise Level: Easy

Usage

For the SolarFix kit to work the solar panel must have a minimum 20mm return lip on the underside of the frame.

Solar panels are being installed on commercial and residential roofs across the United Kingdom at an ever-increasing rate. These arrays provide perfect harbourage for birds, and homeowners are desperate for a solution that does not involve piercing or damaging the solar panels with mechanical fixings or adhesives, hence avoiding warranty infringements.

This innovative system is designed specifically to keep all birds from getting under solar arrays, protecting the roof, wiring, and equipment from damage.

A typical solar panel is approximately 1.6m tall and 1m wide, on a typical panel one should use 3 clips on each long edge and 2 clips on each short edge. See the diagram attached to this product listing for more details and an example of a typical installation.

This non-penetrating system is fast and easy to install, and can be removed for service.

STEP 1: Place clips every 450mm / 18 inches. Slide the clip onto the underside edge of the panel support bracket. Slide as far outward as possible so the clip is all the way on the lip of the panel.

STEP 2: Set the wire mesh screen in place. Make sure the fastener rod comes through the screen at an upward angle as to keep downward pressure on the screen, pushing it towards the roof.

STEP 3: Slide the speed washer onto the shaft of the clip assembly until snug. Make adjustments to the screen as necessary. Tighten speed washer to panel edge.

Include a 75mm (3inch) overlap of the mesh when installing the next section.

STEP 4: Cut off any excess mesh screen sticking over the top edge of the solar panel array. Cut of the clip assembly rod flush with the exterior of the speed washer. Use either our budget or professional wire cutters NT119 or NT120 respectively.

Downloads

Installation Instructions

Installation Instructions

Technical Specification

Technical Specification

Related Products

SolarFix - Solar Panel Mesh - 25mm X 25mm X 250mm X 30m 19G 304 Stainless Steel

From 119.74 30m Roll

SolarFix - Solar Panel Mesh - 25mm X 25mm X 200mm 16 Gauge Weldmesh Galvanised

From 54.30 30m Roll

SolarFix - Solar Panel Mesh Clips

From 3.59 Each

PestFix Standard Side Action Wire Cutter

From 16.79 Each

Netting Corner Tie 160mm x 100

From 3.97 100 Pack

Professional Felco C7 Side-Action Wire Cutters

From 74.37 Each

Guano Removal Tool Kit

From 32.05 Each

PPE Kit Professional - One Person Kit

From 38.48 Each

PPE Kit Standard - One Person Kit

From 11.18 Each

   
Crisp Websites Limited