![]() |
|
|
Bird Control | ![]() | Rodent Control | ![]() | Insect Control | ![]() | Animal Control | ![]() | Shooting Accessories | ![]() | Tools & PPE | ![]() |
Click here for more information ![]() |
We stock a broad range of fixings for securing our bird control netting to different substrates.
There are two types of finish available. Standard fixings are either galvanised steel or bright zinc plated steel (BZP). Professional fixings are either grade 304 or grade 316 stainless steel.
We stock fixings for use on Masonry, Timber, Structural Steel, Cladding and Roof Tiles / Slates
Netting fixings break down in to essentially five categories: Corner Fixings, Intermediate Fixings Straining and Perimeter Products, Netting Mounts and Netting to Perimeter Fixings.
Corner fixings are the first step in the installation process and are used for anchoring the wire rope framework corners and cross-wires to the structure and tensioning from them with the barrel strainers. Corner fixings are heavy duty in their design to cope with the loads imposed on them from the netting framework.
Intermediate fixings are the second step in the installation process and are used at regular spacings around the net system's perimeter to prevent the wire rope framework from pulling away from the structure. The wire rope is fed through these fixings but does not start or finish on them, hence they are light-duty in their design
Netting mounts, if needed, are the third step in the installation process and are used to lift netting systems over obstacles or to raise the netting off the surface being protected sufficiently to allow access and prevent birds pushing the netting down on to the surface.
Netting perimeter & straining products are the components of the wire rope framework that are both common to and essential for all netting installations and provide the interface between the netting and the fixings and any mounts that are being used. Wire rope is the part of the system that gives the netting its shape, its perimeter and allows the net to be tensioned to prevent sagging.
We also stock fixings in kit format to fit up to a 10m X 10m net system in any mesh size in either Standard or Professional finishes, our kits provide everything you need in the correct quantities including corner, intermediate and perimeter components.
For help choosing which fixings to use call us on 01903 538 488
Steel Wire Rope 2mm Diameter 7x7 Strand | |
|
2.5mm Copper Ferrules For 2mm Wire Rope Termination | |
|
Wire Rope Grips M3 For 2mm and 3mm Wire Rope X 20 | |
|
Barrel Strainer Turnbuckle Wire Rope Tensioners | |
|
Netting Corner Eye Bolts and Hook Bolts | |
|
Screw Eye 40mm Masonry Intermediate Fixing X 100 | |
|
Red Wall Plugs x 100 | |
|
Hog Ring Staples SR8 and R8 for G7 and P7 Staplers | |
|
Hog Ring Staples CL12 For Pneumatic Stapler | |
|
Netting Corner Tie 160mm X 4.8mm Black Standard Nylon | |
|
S Clip De-Mountable Net Fixing | |
|
Vine Eye Corner Timber Fixing 100mm | |
|
Beam Clamp Structural Steel Corner Fixing | |
|
Lindapter Type F9 Flange Clamp - Ductile Steel 19mm - 82mm | |
|
M8 Bridge Clamp 30-45mm Flange Galvanised Steel | |
|
Beam Bolt 6mm Structural Steel Corner Eye Fixing | |
|
Beam Clip Hammer On Intermediate Fixings | |
|
Cladding Bolt Sheet Steel Corner Fixing | |
|
Standing Seam Clamp | |
|
Angle Bracket Intermediate Fixing | |
|
Self Drilling Screws - Hex Head | |
|
Bonded Washers | |
|
Slate Brackets | |
|
Net Spike Hammer-In Masonry Intermediate Fixing Galvanised | |
|
Surface Mount Intermediate Netting Fixing | |
|
Mini Eye Bolt Sleeved Intermediate Fixing - 8mm | |
|
Anker Eye Bolt Masonry Intermediate Fixing BZP | |
|
Wire Hanger Intermediate Masonry Fixing BZP - 6mm | |
|
Netting Capital Bracket | |
|
J Pin 8 Inch Netting Ground Anchors | |
|
Bird Scape Humane Netting Escape Funnels | |
|
Two-Way Slate Brackets | |
|
Netting Repair Clips 50mm Stainless Steel | |
|
Screw Pin Intermediate Fixing For Timber and Masonry Stainless Steel | |
|
Dome Head Pozi Drive General Purpose Fixing Screws | |
|
Multi Purpose Wire Rope Stainless Steel Intermediate Bracket | |
|
Net Guides De-Mountable Stainless Steel Intermediate Fixing | |
|
Magnetic Netting Intermediate Fixing - Outdoor 4Kg | |
|
Magnetic Intermediate Netting Fixing 25mm M5 - Indoor 20Kg HD | |
|
Stick On Intermediate Tile Fixing | |
|
Outside Corner Bracket Stainless Steel | |
|
Outside Corner Protector Stainless Steel - Use With Wire Rope | |
|
Masonry Rivets Intermediate Masonry Fixing | |
|
Split Pin Stainless Steel Intermediate Masonry Fixing X 100 | |
|
Screw Pin and Plug Masonry Anchor Fixing 10 Pack | |
|
Blow Out Pump For Masonry Holes | |
|
Hex Drive Socket - 8mm - Magnetic | |
|
75mm Seagull Netting Fixing Kits (Nets Tools Sold Separately) | |
|
50mm Pigeon Netting Fixing Kits (Nets and Tools Sold Separately) | |
|
28mm Starling Netting Fixing Kits (Nets and Tools Sold Separately) | |
|
19mm Sparrow Netting Fixing Kits (Nets and Tools Sold Separately) | |
|
Half Round Ridge Net Mount | |
|
Triangular Ridge Net Mount | |
|
Non Piercing Flat Roof Mount 500mm and 1000mm - Stainless Steel | |
|
Dormer Roof Intermediate Bracket 380mm - Stainless Steel | |
|
Unistrut Slotted Channels - 41mm x 41mm | |
|
Dormer Roof Corner Bracket 380mm - Stainless Steel | |
|
Non Piercing Caddy Pyramid Base Roof Mount | |
|
Intermediate Non Piercing Roof Mount | |
|
Corner Non Piercing Roof Mount | |
|
Non-Piercing Adjustable Ridge Mount 1m and 2m - Galvanised Steel | |
|
Pressed Steel BZP Swivel Coupler For 48.3mm - 50mm Tube | |
|
Non Piercing Roof Mount Extension Collar - Aluminium | |
|
Non Piercing Flat Roof Mount 500mm and 1000mm - Stainless Steel | |
|
Galvanised Steel Cantilever Support Bracket 750mm | |
|
Non Piercing Roof Mount Protective Mat 140cm x 140cm | |
|
Galvanised Steel Cantilever Support Bracket 750mm | |
|
Non Piercing Qwik Foot Roof Mount | |
|
Steel Wire Rope 3mm Diameter 7x7 Strand | |
|
2.5mm Aluminium Ferrules For 2mm Wire Rope Termination | |
|
3.5mm Copper Ferrules for 3mm Wire Rope Termination | |
|
PestFix Pest Control Supplies is a distributor of both professional and amateur use pest control products - including PPE.
PestFix is owned and operated exclusively by the England family, with no external investors to please or remunerate. The two brothers behind the business, Dan & Matt England have the primary objective of putting you, the customer at the centre of their business, rather than banks or shareholders. It is our philosophy that you, the customer, always comes first.
PestFix
Unit 1-3 Cedar Park
30 Terminus Road
Chichester
West Sussex
PO19 8GT
Sales Enquiries
Tel: 01903 538 488
Fax: 01903 539 331
Email: sales@pestfix.co.uk
Press Enquiries (Journalists Only)
Email: media@pestfix.co.uk
![]() | ![]() |
|
|
|
|
|