28mm Starling Netting Kit Complete For Cladding 5m x 5m
Kit comes complete with everything needed for the installation of a 28mm mesh, 5m x 5m starling net into sheet metal cladding.
A 5m x 5m, 28mm mesh, knotted polyethylene, starling net in your choice of colour, galvanised fixings, galvanised perimeter & straining products and specialist tools
Kit includes a detailed 10-step installation guide
This kit is an excellent method of fixing to sheet steel cladding often found in commercial and industrial buildings. It offers fast and secure fixings including rubber doughnut cladding bolts for the corner fixings and self-drill tek screws, bonded washers and angle brackets for the intermediate fixings
The kit contains:
A detailed 10-step installation guide
Sparrow net, 28mm mesh - 5m x 5m in either black, stone, translucent or no flame X 1 (N28-5x5)
Fixings:
Netting Repair Clips (NF259) keep these safe for future use in case of accidental cuts to the netting
Corner Cladding Bolts in Galvanised Steel X 4 (NF164)
Intermediate Fixings in galvanised steel (Hex Head Self Drill Screw, Rubber Bonded Washer & Angle Bracket) X 40 (NF175, NF176 & NF177)
M5 Barrel Strainers in galvanised steel (tensioning products) X 4 (NF142)
Wire rope grips in galvanised steel X 8 (NF140)
Hog ring staples (For fixing the net to the wire rope) in galvanised steel X 800 (NF154)
Netting Corner Ties X 4 (NF148)
Tools:
Sprung Net Shears (For easy cutting of the Net) X 1 (NT125)
Hog Ring Stapler (P7 Stanley Bostich) X 1 (NT122)
Wire Rope Grip Nut Spinner (For tightening the wire rope grips) X 1 (NT121)
Wire Rope Cutters for ease of trimming the wire rope X 1 (NT120)
Magnetic 8mm Hex Head drill / driver bit
Ideal for use on internal or external sheet metal-clad structures such as industrial units, warehouses, steel framed clad structures, loading bay canopies etc
Specialist corner cladding bolts with expanding rubber doughnuts and intermediate self-drill fixings make for fast, easy and secure fixing methods for installing bird control netting effectively against a perimeter of sheet metal cladding without the need to get behind the cladding to terminate the fixings