This kit is an excellent "no drill" method of fixing pigeon control netting to steel beams and girders fast and securely using bolt-up clamps for the corner fixings and hammer-on sprung-steel beam clips for the intermediate fixings
The kit contains:
- Detailed 10-step instruction guide
- Pigeon net, 50mm mesh - 5m x 5m in either black, stone, translucent or no flame X 1 (N50-5x5)
Fixings:
- Netting Repair Clips (NF259) keep these safe for future use in case of accidental cuts to the netting
- 0-20mm Corner Beam Clamps in galvanised steel X 4 (NF159)
- Intermediate Beam Clip fixings in chosen size range of 1-4mm, 5-9mm, 10-16mm or 17-20mm in galvanised steel X 20 (NF68, NF169, NF170 or NF171)
- Wire Rope 7/7 2mm diameter in galvanised steel 25M reel (NF222)
- M5 Barrel Strainers in galvanised steel (tensioning products) X 4 (NF142)
- Wire rope grips in galvanised steel X 8 (NF140)
- Hog ring staples (For fixing the net to the wire rope) in galvanised steel X 400 (NF154)
- Netting Corner Ties X 4 (NF148)
Tools:
- Sprung Net Shears (For easy cutting of the Net) X 1 (NT125)
- Hog Ring Stapler (P7 Stanley Bostich) X 1 (NT122)
- Wire Rope Grip Nut Spinner (For tightening the wire rope grips) X 1 (NT121)
- Wire Rope Cutters for ease of trimming the wire rope X 1 (NT120)
Ideal for use on internal or external steel-framed structures, AHU roof pens, gantries, pipe racks, industrial roofs, warehouse ceilings, loading bay canopies / docks, basement garages etc
Specialist corner clamps and intermediate clips make for fast easy and secure fixing methods for installing bird control netting effectively against a perimeter of structural steel girders without the need for drilling