• Used as intermediate fixings when installing bird netting to sheet metal cladding or roof sheets
• 19mm X 19mm with 6mm diameter holes. Available in galvanised or stainless steel
• Use with self drill screws and rubber bonded washers
• Use at 1.0m intervals for 75mm and 50mm netting, 0.5m intervals for 40mm and 28mm netting and 0.3m intervals for 19mm netting

Galvanised steel or corrosion-proof stainless steel finishes available

Can be used on cladding, uPVC or timber using screws, rivets or bolts to hold in place.

Use at 1.0m intervals for 75mm and 50mm netting, 0.5m intervals for 40mm and 28mm netting and 0.3m intervals for 19mm netting.

Compatible with our 25mm self drill hex-head screws NF176 & NF179