• Clamp-on pigeon posts for mounting post & wire systems to leading edges of gutters
• Can also be used to mount post & wire on vertical flanges of up to 20mm thick.
• Manufactured from grade 304 stainless steel for long service life
• Available as 95mm single head or 130mm double head
• Posts are clamped parallel to the mounting surface at max 1.5m intervals

Use with pigeon wire. standard springs and nickel plated crimps for a discreet solution to your pest pigeon infestation problems.

The clamp is designed to attach the post parallel to the mounting surface

Available as 95mm single head or 130mm double head

Maximum jaw width of clamp = 20mm

Requires a 10mm spanner to tighten the clamp nut

Place at 1.5m max intervals along gutter / flange

We recommend that each end of the post & wire system is counter-tensioned using beam clampsy (NF160) to prevent the system leaning inwards under the spring tension.

Standard springs (PW207) should be used with this system

The pigeon wire should stop and start at each post with a crimp and spring and should NOT be threaded through the post eye continuously.

The single headed gutter post (PW216) is ideal for clamping bird wire onto vertical flanges and gutters to cure light pressure pigeon infestations.

The double headed gutter post (PW217) is ideal for use on gutter lines to cure medium pressure infestations

Prior to installation of a post and wire system the affected area should be cleared of any nest debris and dropping to reduce homing instincts and ensure best results