Polyurethane foam will not adhere to polythene, silicone and Teflon
The Foam provides excellent heat resistance, sound absorption, high ageing resistance and
is resistant to mould and fungal attack.
Typical applications include; horizontal and vertical joints, ductwork, pipe work and services voids through walls and floors and sealing around doors and windows. The foam can also be used for sealing gaps in building heat insulation and fixing and insulation of wall panels
APPLICATION
Only use in temperatures between +5°C and +30°C
- 1. Surfaces to be free from grease, dust and loose material
- 2. Moisten surfaces well before use, this improves adhesion and cell structure of the cured foam
- 3. Shake can well before and at intervals during use.
- 4. Remove cap and attach adapter nozzle (Hand Held) or screw into applicator (Gun applied)
- 5. Turn the can upside down
- 6. Fill the cavity approximately half full and spray the foam with water. For large voids build up
foam in layers and spray foam with water between each layer.
