• PERMOST CS is a microencapsulated insecticide containing permethrin which is effective against various flying and crawling insects and a long residual activity up to 60 days.
• Use in and around buildings, as surface spray, as space spray (ULV), and for cold or hot fogging.
• PERMOST CS is very effective against crawling insects such as ants, beetles, bed bugs, cockroaches, darkling beetles, earwigs, fleas (adults and larvae), hide beetle, silverfish, ticks and red mites. Flying insects such as flies, mosquitoes, cloth moths and warehouse food moths. Store house pests such as grain weevil, red grain beetle, saw-toothed beetle and flour beetle
• Provides effective control against House Flies, Cockroaches, Ants, Bed Bugs, Mosquitoes, Beetles & Silverfish
• Active ingredient Permethrin 25.25% Microencapsulated
• Professional Use Only Users Must Comply With Statutory Usage Conditions On Product Label

PERMOST CS is a formulated insecticide contains the active ingredient Permethrin 25% The active permethrin disturbs the functions of the insects nervous system by interacting with sodium channels.

PERMOST CS is a specialized microencapsulated insecticide in water, containing 50% small and 50% big microcapsules for a good knock-down effect and a long residual activity up to 60 days.

For use as a fogger, surface spray or crack and crevice treatment.

IN DOMESTIC SITUATIONS, APPLY AS A CRACK AND CREVICE TREATMENT ONLY.

For surface spraying, apply through a suitable hand mechanical or electric sprayer producing a coarse spray. Spray all infested areas giving special attention to cracks, crevices, dead spaces, and harbourages. Product may be applied to hard porous, soft porous and non-porous surfaces.

For space spraying, apply through equipment capable of producing and distributing droplets of a diameter below 50 microns. This equipment may be thermal fogging equipment, cold aerosol generating ultra low volume (ULV) equipment, fan assisted rotary atomiser and hand-held or knapsack sprayers which are designed for space spraying. Spray into the air around the areas to be treated paying particular attention to sites where insects rest and breed or harbourages.

Close all doors and windows prior to use. Do not enter the treated area for at least 30 minutes after treatment or until spray has dried. Ventilate treated area properly. Retreat after 2 months or if necessary.

SURFACE SPRAYING - Heavy Infestation: Mix 50 ml of PERMOST CS with 5 litres of water and then apply at a rate of 5 litres over 100 m². Low Infestation: Mix 25 ml of PERMOST CS with 5 litres of water and then apply at a rate of 5 litres over 100 m².

SPACE TREATMENT - Hot fogging: Use 100 ml of PERMOST CS to treat 500 m². Cold fogging: Mix 100 ml of PERMOST CS with 5 litres of water and use to treat 500 m³. Where possible close windows and doors before application and keep closed for 1 hour. Ventilate treated area for at least 4 hours or use an air exhauster (1200 m³/h rate) to ventilate rooms. Repeat application if necessary.

Use biocides safely always read and act in accordance with the manufacturer's label

Material Safety Data Sheet

PERMOST CS BROCHURE

Product Label Front

Product Label Back