Pigeon Post and Wire Kits For Steelwork
- Complete kits for mounting pigeon post & wire on the flanges of structural steelwork
- Prevents pigeons landing on steelwork and defecating on whatever is underneath.
- Quick and easy to install using tools provided plus a 10mm spanner.
- Low profile alternative to using bird spikes, with all stainless steel components.
- Sold in single head and double head variants (see usage) & in 15m or 30m sizes.
- Double head kits temporarily unavailable
Specification
Each kits comes complete with posts, springs, crimps, wire and a crimp and cut tool.
Posts, wire and springs are all stainless steel and the crimps are nickel-plated, giving a long service life in all weather
Each kit contains the following:
| |
PW285 |
PW286 |
PW287 |
PW288 |
| Pigeon Wire 0.45mm 1 X 7 304 Stainless Nylon Coated |
50m |
50m |
50m |
100m |
| Beam Clamp Pigeon Post Single Head 95mm X 4mm |
11 |
21 |
0 |
0 |
| Beam Clamp Pigeon Post Double Head 130mm X 4mm |
0 |
0 |
11 |
21 |
| Counter-Tension Clamp |
2 |
4 |
2 |
4 |
| Pigeon Wire Standard Spring |
10 |
20 |
20 |
40 |
| Bird Wire Nickel Crimp |
100 |
100 |
100 |
100 |
| Bird Wire Crimp Tool |
1 |
1 |
1 |
1 |
Usage
For use in curing light-medium pressure pigeon infestations on structural steelwork
Prevents pest feral pigeons from being able to land, and therefore perch, on the either the upper or lower flanges of I-section and C-section structural steel members.
Not suitable for use in medium to high pressure infestations where pigeons are being actively fed or are nesting. Artificial food sources and or nest sites should be removed prior to installing this system.
Use single head kits for light pressure installations and the double head kits for medium pressure installations
.jpg)
(1).jpg)
