Our Pigeon Spike 5 Metre Kit is an all-in-one, cost-effective solution for humane bird control, designed to deter pigeons and other pest birds from perching, nesting, or roosting on your property without causing harm.
Choose from a variety of polycarbonate or premium-grade 304 stainless steel spikes to suit different surface widths, ensuring maximum protection and long-term reliability for your property while maintaining aesthetics.
Key Features:
- Narrow Polycarbonate: Covers 42mm - 107mm.
- Narrow Stainless Steel: Covers 60mm - 125mm.
- Medium Polycarbonate or Stainless Steel: Covers 150mm - 215mm.
- Wide Stainless Steel: Covers 180mm - 245mm.
Preparation:
-
Disinfect the Area:
Bird droppings can carry transmittable diseases. Thoroughly disinfect the working area with
GuanoFix Plus avian disinfectant before proceeding.
-
Prepare the Surface:
Proper surface preparation is crucial for a successful installation. Avoid laying spikes on contaminated or unprepared surfaces.
- For greasy surfaces, clean thoroughly with
Surface Cleaner before priming.
- For polished surfaces, such as metal or plastic, use
Surface Activator to ensure optimal adhesion.
- Always prime the surface with Spike Adhesive, applying it with a
Disposable Priming Brush for a secure, long-lasting bond.
Positioning:
- Ensure the spike tips overhang the leading edge of ledges, parapets, or sills by approximately 10mm to prevent birds from gaining an initial foothold.
- When installing parallel rows of spikes, maintain:
- 65mm gap between rows for pigeon spikes.
- 100mm gap between rows for seagull spikes.
- For smaller areas, snap off the spike strip sections along the pre-marked grooves to fit the space.
Note: The polycarbonate base is flexible and can bend along shallow curves. However, increased spacing between spikes on curves may reduce effectiveness.
Installation:
Gluing the Spikes
- Apply an 8mm-wide bead of neutral cure low-modulus adhesive along the underside of the spike strip.
- Firmly press the polycarbonate base onto the primed surface, ensuring that glue rivets rise through the holes in the base for a secure attachment.
- Allow the adhesive to set for at least 24 hours before disturbing the spikes.
Rain Gutter Installation:
- Secure spikes to the outer edge of gutters using BirdOff Gutter Clips..
- Use two clips per strip, placing one at each end of the spike strip for stability.
Important Notes:
- Bird spikes are designed to deter lightweight birds (under 1kg), such as pigeons and gulls. They are not suitable for larger animals, human intruders, or pets.
- While the polycarbonate base allows for bending, this may reduce spike density and effectiveness.