BIRDOFF Seagull Spikes
BIRDOFF Seagull Bird Spikes are a heavy-duty bird control solution specifically designed to deter seagulls and other large birds from landing or roosting on buildings. These professional-grade bird spikes provide superior protection for both commercial and residential properties where larger birds pose a persistent problem. By preventing roosting and nesting, they help reduce noise, fouling, blocked drainage, and structural damage.
Humane Bird Spikes for Large Birds
These bird spikes are a humane bird deterrent that prevents seagulls from landing and roosting without causing harm. By discouraging repeat behaviour, they offer an ethical and effective bird control solution suitable for use in urban, coastal, and industrial environments.
Preparation:
-
Disinfect the Area:
Bird droppings can carry transmittable diseases. Thoroughly disinfect the working area with
GuanoFix Plus avian disinfectant before proceeding.
-
Prepare the Surface:
Proper surface preparation is crucial for a successful installation. Avoid laying spikes on contaminated or unprepared surfaces.
- For greasy surfaces, clean thoroughly with
Surface Cleaner before priming.
- For polished surfaces, such as metal or plastic, use
Surface Activator to ensure optimal adhesion.
- Always prime the surface with Spike Adhesive, applying it with a
Disposable Priming Brush for a secure, long-lasting bond.
Positioning:
- Ensure the spike tips overhang the leading edge of ledges, parapets, or sills by approximately 10mm to prevent birds from gaining an initial foothold.
- When installing parallel rows of spikes, maintain:
- 65mm gap between rows for pigeon spikes.
- 100mm gap between rows for seagull spikes.
- For smaller areas, snap off the spike strip sections along the pre-marked grooves to fit the space.
Note: The polycarbonate base is flexible and can bend along shallow curves. However, increased spacing between spikes on curves may reduce effectiveness.
Installation:
Gluing the Spikes
- Apply an 8mm-wide bead of neutral cure low-modulus adhesive along the underside of the spike strip.
- Firmly press the polycarbonate base onto the primed surface, ensuring that glue rivets rise through the holes in the base for a secure attachment.
- Allow the adhesive to set for at least 24 hours before disturbing the spikes.
Rain Gutter Installation:
- Secure spikes to the outer edge of gutters using BirdOff Gutter Clips..
- Use two clips per strip, placing one at each end of the spike strip for stability.
Important Notes:
- Bird spikes are designed to deter lightweight birds (under 1kg), such as pigeons and gulls. They are not suitable for larger animals, human intruders, or pets.
- While the polycarbonate base allows for bending, this may reduce spike density and effectiveness.
