BIRDOFF Wide Pigeon Bird Spikes
BIRDOFF Wide Pigeon Bird Spikes are a professional bird control solution designed to protect wide linear surfaces from pigeons and other nuisance birds. These durable and humane bird spikes provide maximum bird-proofing coverage, making them ideal for locations where standard deterrents may not offer sufficient protection. Suitable for both residential and commercial properties, they help prevent birds from landing, roosting, and nesting on vulnerable structures.
Humane Bird Spikes for Wide Surface Protection
These bird spikes are a humane deterrent solution that prevents birds from landing and roosting without injury. By discouraging repeat activity, they help reduce fouling, noise, and property damage while supporting ethical bird control practices.
Preparation:
-
Disinfect the Area:
Bird droppings can carry transmittable diseases. Thoroughly disinfect the working area with
GuanoFix Plus avian disinfectant before proceeding.
-
Prepare the Surface:
Proper surface preparation is crucial for a successful installation. Avoid laying spikes on contaminated or unprepared surfaces.
- For greasy surfaces, clean thoroughly with
Surface Cleaner before priming.
- For polished surfaces, such as metal or plastic, use
Surface Activator to ensure optimal adhesion.
- Always prime the surface with Spike Adhesive, applying it with a
Disposable Priming Brush for a secure, long-lasting bond.
Positioning:
- Ensure the spike tips overhang the leading edge of ledges, parapets, or sills by approximately 10mm to prevent birds from gaining an initial foothold.
- When installing parallel rows of spikes, maintain:
- 65mm gap between rows for pigeon spikes.
- 100mm gap between rows for seagull spikes.
- For smaller areas, snap off the spike strip sections along the pre-marked grooves to fit the space.
Note: The polycarbonate base is flexible and can bend along shallow curves. However, increased spacing between spikes on curves may reduce effectiveness.
Installation:
Gluing the Spikes
- Apply an 8mm-wide bead of neutral cure low-modulus adhesive along the underside of the spike strip.
- Firmly press the polycarbonate base onto the primed surface, ensuring that glue rivets rise through the holes in the base for a secure attachment.
- Allow the adhesive to set for at least 24 hours before disturbing the spikes.
Rain Gutter Installation:
- Secure spikes to the outer edge of gutters using BirdOff Gutter Clips..
- Use two clips per strip, placing one at each end of the spike strip for stability.
Important Notes:
- Bird spikes are designed to deter lightweight birds (under 1kg), such as pigeons and gulls. They are not suitable for larger animals, human intruders, or pets.
- While the polycarbonate base allows for bending, this may reduce spike density and effectiveness.
