|
|
Bird Control | Rodent Control | Insect Control | Animal Control | Shooting Accessories | Tools & PPE |
Training | Find a Pest Controller | News | Common Problem Areas | Trade Customers | Resource Centre | Save 8 Zone | Special Offers |
For use as an intermediate netting perimeter wire rope fixing when installing bird control netting on structural steel beams, columns and roof trusses
Simply feed the perimeter wire rope between the clip's jaws and then hammer the clip home on to the flange.
Do not hammer the clip home completely, instead leave a gap of about 3mm between the back wall of the clip and the leading edge of the flange/roof tile, in order to allow the wire rope to slide through when it is tensioned.
Use at 1.0m intervals for 75mm and 50mm netting, 0.5m intervals for 40mm and 28mm netting and 0.3m intervals for 19mm netting.
WARNING: Once hammered home the clips are virtually impossible to remove, please ensure that you have measured correctly.
2.5mm Aluminium Ferrules For 2mm Wire Rope Termination | |
|
Professional Stanley Bostitch P7 Hog Ring Stapler | |
|
Beam Clamp Toothed 0mm - 20mm Corner Fixing Stainless Steel | |
|
Pigeon Netting 50mm Translucent | |
|
Hammer on beam clips galvanised steel 3-8mm | |
|
Hammer On Beam Clips Galvanised Steel 2-3mm | |
|
Hammer On Beam Clips Stainless Steel 8-14mm | |
|
Steel Wire Rope 2mm Diameter 7x7 Strand | |
|
PestFix Pest Control Supplies is a distributor of both professional and amateur use pest control products - including PPE.
We have the primary objective of putting you, the customer at the centre of their business, rather than banks or shareholders. It is our philosophy that you, the customer, always comes first.
PestFix
Unit 1-3 Cedar Park
30 Terminus Road
Chichester
West Sussex
PO19 8GT
Sales Enquiries
Tel: 01903 538 488
Fax: 01903 539 331
Email: [email protected]
Press Enquiries (Journalists Only)
Email: [email protected]
|
|
|
|
|